Interactive Mother's Day Card

by littleBits

Published on April 23, 2014

Show your mom a littleLove with this littleBits starter kit project!

How To Make It


Show your mom a littleLove with this interactive card! You only need a starter kit to make this project, so let's get started with the circuit. First take your power module, and connect the battery with battery adapter. Make sure you turn the switch on the power module from off to on.


Next, connect the pressure sensor.


Connect pressure sensor to a wire module


Connect wire to pulse. Use the littleScrewdriver to adjust the speed on the pulse module


Connect pulse to vibration motor


Connect vibration motor to bargraph


Connect bargraph to RGB LED. Use the littleScrewdriver to adjust the color of the light.


Connect RGB LED to LED module. And we're done!


Print out the templates attached and start building your Mother's Day gift! We have included some sample graphics, but get creative and draw your own!

Related Projects

Little Bit your life

This proposal for Little Bits is a modular element capable to contain several bits with flexibility.  The main idea was to ...

Threshold Locked Button

A threshold prevents a button from being activated until a bright led turns on, showing that the button is pressable. When pressed...

The Solar Sensor

 http://i.imgur.com/lY3LJRe.jpgI have built a panel of aluminum foil that receives and transmits the light to the other panel...